Furniture & millwork studio · Denver, Colorado

Built from the grain out.

Dining and live-edge tables, chairs, epoxy river pieces, bar tops and conference tables, made on commission. Every piece is drawn for one room, joined to outlast it and finished to be used.

Live-edge walnut dining table with a deep blue resin river, in a sunlit dining room

02 — Material first

Choose the wood before the shape.

Species decides colour, hardness, how a piece ages and how it moves through a dry Colorado winter. Five worth knowing before you choose:

  1. 01

    Black walnut.

    Chocolate heartwood, cream sapwood. Mid-hard and stable; with years of daylight it mellows toward a warm, lighter brown.

  2. 02

    White oak.

    Straight, tight grain. Quartersawn boards show silver ray fleck. Hard, resistant to moisture, entirely honest.

  3. 03

    Hard maple.

    Pale, dense and one of the hardest domestic woods. Oil finishes warm it slightly toward honey.

  4. 04

    Cherry.

    Pinkish when cut, deep red-brown after months of light. The species that changes most after delivery.

  5. 05

    Cottonwood.

    Soft, light and often wildly figured as a slab. Striking for statement tops when the finish does the protecting.

03 — How a commission runs

Six steps, one drawing set.

Nothing is cut until you have seen the drawing and approved the material.

Sheet
03 / 07
Steps
06
Revision
A
Applies to
Every commission
  1. Conversation

    Tell us the room, the use and a rough size. The short form below is enough to begin.

  2. Measure

    Dimensions, clearances and access confirmed, in person or from your plans.

  3. Drawing

    A scaled drawing and a written specification: species, joinery, finish.

  4. Selection

    You choose the boards or slab, or approve the ones set aside for you.

  5. Making

    Milling, joinery, glue-up, the pour if there is one, then flattening.

  6. Finish & delivery

    The finish cures fully before the piece leaves; delivery is arranged with you.

Conversation · Measure · Drawing · Selection · Making · Finish The full process

04 — In the shop and in the room

Light, grain, joints.

Illustrative images of the kinds of pieces we make. Photographs of finished commissions will take their place.

  • Live-edge walnut table with a blue resin river in a bright dining room
    Walnut and blue resin river tableIllustrative image
  • Close-up of dovetail and mortise-and-tenon joints in oak and walnut
    Dovetail and mortise-and-tenon joineryIllustrative image
  • Maker pouring tinted epoxy into a live-edge slab mold
    Pouring a tinted resin riverIllustrative image
  • Set of white oak dining chairs with sculpted joinery in a sunlit studio
    White oak dining chairsIllustrative image
  • Kitchen island with a seamless smoky epoxy and wood countertop
    Smoked resin and wood islandIllustrative image
  • Woodworker rubbing oil into a tabletop with a cloth
    Hand-rubbed oil finishIllustrative image
Long hardwood conference table in a modern office boardroom
Hardwood conference tableIllustrative image

05 — For restaurants and offices

Furniture that survives a full service.

Bar tops, conference tables, restaurant tops and millwork, built to your designer’s drawings or ours, with finishes chosen for spills, heat and constant hands.

06 — Client words

In their words, when they’re ready.

Reviews from Denver Woodworks clients will appear here once they are collected and approved.

We would rather show none than show one we can’t stand behind.

[Testimonials — to come]

07 — Start a commission

A few lines are enough to start.

Tell us what you have in mind and roughly where it will live. For a full brief, with dimensions, species, finish and budget, use the commission form.

Required

Rough size, how it will be used, any timing.